Cleaning method of grinding dust collector

The automatic cleaning methods commonly used by grinding dust collector include high-pressure gas pulse backflushing and mechanical vibration. Pulse backflushing is to use the preset parameters of the controller to give a signal to the solenoid valve, instantly open and close the solenoid valve diaphragm, so that the high-pressure gas enters the injection pipe, and uses the rapid expansion force of the gas to shake off the dust on the surface of the filter cartridge. The general gas pressure We set it to around 6kg force.

The mechanical vibration cleaning of the filter cartridge dust collector is often used in small stand-alone filter cartridge dust collectors. It uses the shaking force generated by the eccentric device on the filter plate to clean the dust. This action needs to be operated after shutdown.

grinding dust collector https://www.kaisenfilter.com/Grinding-Dust-Collector

Posted in Default Category on September 15 at 03:48 AM

Comments (0)