Product features of classification of industrial dust vacuum:
1. The machine adopts mechanical compression and fully enclosed flange connection, and the maximum pressure can withstand 0.6Mpa to prevent leakage.
2. The maximum flow of classification of industrial dust vacuum is 200T/h, and the minimum is 4T/h. Because the machine enters from the inlet DN40 or DN50, DN80, DN100, DN120, it is divided into two to three outlets into the filter, plus each layer Seven or eight holes in the middle of the flange enter the inner cavity for filtration, and then come out from the small middle flange. The liquid outlet is DN40 or DN50, DN80, DN100, DN120 to ensure the fast in and out of the liquid, increase the flow rate, and shorten the filtration cycle. .
3. The classification of industrial dust vacuum has a maximum of 20 layers, and is filtered by double mesh plates, which increases the effective filtering area, and the maximum filtering area is 20 square meters. Thus, the volume of the whole machine is reduced, and the occupied area is greatly reduced.
4. The disposable activated carbon of the filter can reach 3 kg to 300 kg, which can solve the problem of storing powder activated carbon equipment in the pharmaceutical and chemical industries. Placing the activated carbon horizontally can ensure sufficient storage in the frame, thereby solving the problem of handling activated carbon. The filter also has a unique system with a recoil device and a thermal insulation heating device, (mainly when the filter membrane is blocked during filtration and the filter membrane is replaced), which prolongs the working time and increases the cost of consumables. The recoil device and thermal insulation heating system are designed. , This machine is also specially equipped with a set of special microporous filter membrane with recoil device and heat preservation heating), mainly for chemical, pharmaceutical and other industries, when the liquid temperature is low and crystallizes during filtration, and some liquids appear viscosity at low temperature. The problem of difficult filtration is solved, and it is a new type of filtration equipment that is more advanced in the market.
5. The filter is divided into two types: insulation filter and non-insulation filter. The insulation type can solve the problem of low temperature and crystallization in the filtration of pharmaceuticals and fine chemicals. The insulation type is divided into two types: steam heating and electric heating tube heating. set), three sandwiches are also available. Users can choose to use according to the actual situation.
classification of industrial dust vacuum https://www.kaisenfilter.com/classification-of-industrial-dust-vacuum.html
Comments (0)