How is the integrated transfer machine performed?

How is the integrated transfer machine performed? Basic CNC machine tool people know that the tool holder is an important part of the integrated transfer machine. Related to the precision and type of metal parts production, generally speaking, the structure of the integrated transfer machine is generally rotating. The tool is installed on the tool holder in the circular direction and can be installed with radial turning tools, axial turning tools, drills and boring tools, which is what we say is related to the type of parts processing. But you may be less familiar with the installation and use of a knife holder, commonly known as a row knife. Let's talk about how the integrated transfer machine is used to arrange knives.

1. For the X direction, the front turning tool pulls the material out of the circle, measures the diameter, and inputs the X diameter into the tool patch. The system input is different from the Z direction, for example a diameter of 20mm. Enter X20. It's in the tool patch!

2, the Z direction spindle starts, the hand wheel pulls the front turning tool, and input Z0 into the end knife patch. We use the new SYNTEC system for input in T101, and the GSK980TD is just in the knife fill input.

3, first, put the material into the three claws to ensure the length of the machined parts. After comparing calipers, move the tool holder with the hand wheel and position it. Pull material out and clamp by positioning.

4. Debugging and processing should be done slowly to prevent error crashes. Since all knives are invariant, it is understandable that all knives are lined up on the X-axis.

5, let's take a look at whether the tool holder needs to modify the parameters:

6, if you do not need to modify the parameters, the knife is very simple, similar to the rotation of the knife holder, but the code changed when programming, each knife to a number to it, programming remember how much the knife is.

7, if you need to modify the parameters, you can modify it according to the manual, and then install and use according to the above steps.

8, generally experienced parking engineers will choose a knife such as No. 1 knife, manual or handwheel close to the workpiece end, try to cut a knife, exit along the X axis, press the knife supplement (or offset) key, select the offset page, such as 101, move the cursor to Z item, press 0, and then press Insert.

integrated transfer machine https://www.zjshuangzheng.com/How-to-choose-the-right-integrated-transfer-machine.html