What is the technical operation process of Automatic Spindle Stop Twisting Machine for Sale? As a glass fiber Automatic Spindle Stop Twisting Machine for Sale manufacturer, let Xiaobian take everyone to learn together!
1.Automatic SPINDLE Stop Twisting Machine for Sale to deal with various parts of the machine, including water levels, water quality, oil levels, water tanks, air pumps, etc., but also check the tightening and lubrication of the Word Wheel Wiring machine.
2. If there are debris in the electric radiator groove, it should be cleaned to ensure the ventilation and cooling of the motor. Whether there are debris and tools on the water tank tower wheel, motor belt, and roll cylinder. Otherwise, you cannot drive.
3.Automatic SPINDLE Stop Twisting Machine for Sale should run at a low speed to confirm that there is no abnormality before increasing the operation speed.
4. During the operation of the machine, if there are water leakage, oil leakage, or abnormal sounds, it should be stopped and maintained immediately without running a disease.
5. When parking, the speed should be adjusted first, and then press the stop button. But when you park urgently, you can press the stop button first.
6. When normal stop, first rotate the speed regulating knob of the electromagnetic speed regulator to the low -speed speed, and then turn off the clutch switch.
7. During the operation of the device, there must be no personnel to stay near the roll tube to prevent the iron from throwing out the injury.
8. Bearing should be lubricated and maintained every 3 months.
automatic spindle stop twisting machine for sale https://www.newheli.com/KV2008A-TFO-RING-TWISTING-MACHINE.html
Comments (0)