In engineering transportation, electric cargo tricycles are often used. In order to ensure that the vehicle is safe on the road, some corresponding inspections are required, including the inspection of new electric cargo tricycles and inspections during driving. What exactly do these checks include? Jiuzhi will take old and new users to find out.
Electric Cargo Engineering Tricycle New Vehicle Inspection has:
1. When the electric cargo tricycle is empty, carry out the lifting operation test according to the operation procedure of dumping and lifting.
2. Check whether the oil in the hydraulic oil tank of the electric cargo tricycle is sufficient, and add enough oil according to the specified oil label requirements.
3. Check whether the manual control valve and air circuit are leaking, and whether there is leakage in the oil circuit of the hydraulic system.
4. During the lifting process, check whether the hydraulic cylinder, gear pump, control valve and other components can work normally, and whether there is any sticking or movement during the hydraulic lifting.
5. After several lifting tests under no-load condition, it can work normally without oil leakage or air leakage, ensuring safe driving.
Inspection of the electric cargo tricycle before and during driving includes the following aspects:
1. Before driving, the driver should check and clear the passage to ensure that the electric cargo tricycle can pass normally.
2. When the electric cargo tricycle starts, first turn on the emergency switch, turn on the electric lock, set the position of the direction switch, start slowly and accelerate gradually, and avoid starting quickly to prevent the motor from being burned out due to excessive current.
3. When the electric dump truck starts, honk the horn to remind you when turning. When the vehicle turns, goes downhill, and the road is uneven, slow down when passing through a narrow road. Try to avoid sudden braking while driving.
In an emergency, pull down the switch quickly, step on the brake pedal, and stop quickly.
4. Gradually increase the speed when driving, and do not drive at a low speed for a long time; when giving way, the empty vehicle should let the heavy vehicle go first; when two electric cargo tricycles are driving in the same direction, keep a proper distance between the front and rear, and do not get too close.
5. If any abnormal phenomenon is found during driving, it should be stopped immediately for inspection, and the fault should be eliminated in time. Do not let the electric cargo tricycle work with illness.
6. When the working voltage of the self-unloading electric cargo tricycle is lower than the limited voltage, it should stop working and charge it in time, and do not let the vehicle be in a state of power deficit for a long time.
Electric Cargo Engineering Tricycle Exporter - Jiuzhi
The electric cargo tricycle produced by Weifang Jinpuruien Machinery Equipment Co., Ltd. is heavy, scientifically designed, convenient and flexible. The load capacity is three times that of ordinary manpower dump trucks, and the efficiency is increased by more than 50%, which greatly reduces labor costs and becomes an essential equipment for construction sites. Welcome to consult, we will provide you with the best quality engineering vehicles!
https://www.wfjpre.com/Various-inspections-of-electric-cargo-engineering-tricycles.html
Comments (0)