Since the first product was produced in my country's plastic machinery manufacturing industry in the 1950s, after nearly half a century of rapid development, especially since the reform and opening up, it has now completed a complete range of products, and its main technical and economic indicators have approached or reached the international advanced level. It has a complete industrial system with internationalization, gradual specialization of production, and relatively large-scale production. The products basically meet the needs of the domestic market, and the ability to earn foreign exchange through exports is rapidly improved.
1. The status quo of my country's plastic machinery manufacturing industry
At present, there are about 600 enterprises and units engaged in the manufacture of plastic machinery products and related products in my country, of which about 250 can provide plastic molding equipment.
My country's plastic machinery industry already has a considerable scale. At present, my country's main plastic machinery production capacity has exceeded 100,000 sets, including more than 8,000 sets of extrusion equipment, more than 30,000 sets of injection molding machines, more than 3,000 sets of hollow molding equipment, and more than 3,000 sets of plastic machinery. The annual output value reaches 8 billion to 10 billion yuan.
From the market analysis of plastic products, combined with the full play of my country's original production capacity of plastic machinery products, from 2001 to 2010, the average annual growth rate of domestic market capacity of plastic machinery products in my country is about 6%. In 2000 and 2005, it was 8 billion yuan and 11 billion yuan respectively, and it is expected to reach 14.5 billion yuan in 2010. With the improvement of my country's product quality and the increase of varieties, the share of plastic machinery products in the domestic market will also increase, which is expected to be 70%, 75% and 80% respectively; the total industrial output value of plastic machinery products is 5.6 billion yuan. , 8.25 billion yuan and 11.6 billion yuan. With the increase of my country's product exports, it is estimated that in 2010, the total industrial output value of my country's plastic machine products will reach 14 billion yuan, 2.33 times that of 2000, with an average annual growth rate of about 9%, of which the growth rate from 2001 to 2005 is 10% , the growth rate from 2006 to 2010 was 8%.
From the analysis of the number of plastic machinery products, in 2000 and 2005, there were 55,000 and 75,000 units respectively. 5%, and 35% for other presses.
2. My country's plastic machinery manufacturing industry exports
In addition to meeting domestic demand for general plastic equipment in my country, the export volume of equipment is also increasing year by year. In the past three years, my country's export of plastic machinery products has been in the fastest growing period in history. For a long time, the foreign exchange earned by exports has been around 50 million US dollars. It exceeded 100 million US dollars for the first time in 1998 and increased to 238 million US dollars in 2001, an increase of 31.09% over 2000.
Relevant experts analyzed that, in the future, the export of plastic machinery products in my country will be dominated by injection molding machines. From the analysis of the export quantity, it is estimated that the proportion of various types of machines is: 60.4% for injection molding machines, 6.8% for extruders, 11.7% for blow molding machines, and 21.1% for other plastic machines. In terms of foreign exchange earnings from exports of plastic machinery products, injection molding machines accounted for 74.1%, extruders accounted for 8.1%, blow molding machines accounted for 8%, and other plastic machinery products accounted for 9.8%.
In 2002, the total export value of the plastic machinery industry was higher than in 2001. Enterprises that maintained a strong export momentum in 2002 included Ningbo Haitian Co., Ltd. and Zhejiang Shenda Plastic Machinery Co., Ltd., which increased by 3.6% and 3.39% respectively compared with 2001.
3. Plastic Mold products export
In addition, my country's plastic mold exports are also on the rise. In 2002, my country exported 19,500 tons of molds, worth 252 million US dollars. Among them, plastic or rubber molds are 467,800 sets, about 172 million US dollars, accounting for 68.3% of all export molds.
The main sources of exported plastic mold products are Guangdong, Zhejiang, Shanghai and Fujian, accounting for 57%, 13.9%, 11% and 5.2% of the national abrasives exports respectively. The main export markets are Hong Kong, Japan, Taiwan Province of China, the United States and Singapore, followed by Vietnam, Thailand, Malaysia, South Korea, India, Indonesia and Mexico.
Although the production areas of plastic mold products in my country are all over the country, they are mainly concentrated in the provinces and cities along the southeast coast, especially in the Pearl River Delta and the Yangtze River Delta. In terms of provinces and cities, Guangdong and Zhejiang provinces are the most developed. The plastic molds produced in these two provinces account for about 2/3 of the country's total mold production. Dongguan, Shenzhen and Shunde are the most developed places for plastic mold production in Guangdong Province; while Ningbo and Taizhou are the most developed places in Zhejiang Province. Plastic injection molds are the leading products in plastic molds, mainly serving the automobile, motorcycle and electrical appliance industries.
LITAI MACHINERY CO, LTD is founded in 2001. For more than 20 years, our enterprise mission is to realize producing automatic plastic packaging machines. Our thermoforming machines are of high quality. Welcome to inquire, we will provide you with the best quality product consulting services!
Comments (0)