There are many types of Wall Gang Switch Mould on the market. The first thing to consider is the use of Wall Gang Switch Mould, and then consider some elements of Wall Gang Switch Mould’s application, and make reasonable use of Wall Gang Switch Mould to maximize the performance of your products. function.
(1) The rated current value of the socket should be selected according to the nature of the load. When using a socket, the starting current is very large. If the selected socket cannot withstand the impact of the starting current within the required time, an arc will appear on the contacts of the socket, causing the socket contacts to be welded together or formed by arc splashing. Damage to the socket.
(2) The voltage of the socket application circuit should be less than the rated voltage of the socket.
(3) Wall Gang Switch Mould used for mains should pay attention to its insulation resistance, and the best choice is the socket of non-metal operating handle.
(4) When the socket is connected to the circuit, the quality of the contact engagement will directly affect the load of the circuit. Therefore, sockets with small contact resistance should be used in circuit design; contact sockets with gold should be used when designing low-power circuits and when necessary.
(5) The selection of mechanical life and electrical life of Wall Gang Switch Mould should be determined according to the application. In the case where the switch is frequently opened and turned off and the load is not large, the mechanical life of the switch should be emphasized when selecting the switch; in the case where the switch accepts high power, the electrical life of the switch should be emphasized when selecting the switch.
Wall Gang Switch Mould https://www.tangrammould.com/Wall-Gang-Switch-Mould.html
Comments (0)