1. Connect to a place with a temperature difference.
The normal use of the locator has requirements on the environment. Typically, the operating temperature of the button gps tracker is between -20°C and 75°C. For specific numbers, please refer to the product model description. If the temperature and humidity are too low or too high, the positioner will be suspended. Therefore, when the locator is not working, it can be checked that the locator is placed correctly. In general, it should be avoided near air conditioning pipes, roofs, and exhaust pipes, especially in summer.
2. Connect to a place with high humidity.
The working humidity of the positioner is usually controlled at 20~80RH. The specific number should refer to the product model description. When installing the retainer, choose a location that is not prone to water entry to keep the terminals dry, such as avoiding installing it under a wiper. At the same time, please be careful to keep away from the air conditioner socket, so as to avoid the accumulation of condensed water in the terminal when the temperature difference changes, which will seriously affect the service life of the product.
3. It is connected to a location where the signal is disturbed.
When installing the button gps tracker, avoid placing the locator together with emission sources such as parking sensors, walkie-talkies and other vehicle communication devices. At the same time, it must be ensured that the host faces upwards, there is no metal or obstacles above, and the horizontal tilt angle is controlled within 15° so that the locator can receive signals.
button gps tracker https://www.eelinktracker.com/sos-button-4g-lte-gps-tracker.html
Comments (0)