Talk about the main advantages of booster-ex2 weldy plastic extrusion welder knowledge

　　The main advantages of booster-ex2 weldy plastic extrusion welder:

　　1. Energy saving. Radiator flash booster-ex2 weldy plastic extrusion welder uses two 125KVA solder resist transformers as power source, pneumatic compression, upsetting, no hydraulic station. Compared with other single-phase two 315KVA AC welding transformer and two welding machines with a power of 18KVA hydraulic station, UN-250AB welding machine can save up to 78℅.

　　2. The requirements for the power grid are low. Only a 250KVA power grid can be satisfied.

　　3. High welding precision. Using programmable controller PLC and inlet stepping motor to control the flashing process, the burning amount and burning speed can be accurately set, and the welding current is controlled by the microcomputer welding resistance controller. The center distance error of the film head after welding It can be controlled within ±0.2mm, which is convenient for subsequent assembly and welding.

　　4. Automatic centering function. Ensure that the distance between the two ends of the pipe string and the two film heads is the same before welding, so as to ensure the same amount of burning at both ends.

　　5. High welding efficiency. Because the workpiece is pressed by the double force cylinder, its reaction speed is significantly faster than that of the hydraulic cylinder.

　　6. It is convenient to operate and maintain. Because there is no hydraulic station, the debugging points and fault points of the product should be less, and there will be no oil leakage.

　　booster-ex2 weldy plastic extrusion welder https://www.dowelding.com/Booster-EX2-Weldy-plastic-extrusion-welder.html