Suitable for ceramic inkjet printing tile printer

Products Characters

Meet the requirements of big slabs

● Max printing systems carries 16 levels grey scales processing capabilities which can meet the requirements of delicacy and balance

● Balanced and optimized printing control board installed in individual printhead is equipped with independent CPU with exclusive 4G memory

● Compensation function for injectors blockage can avoid the product quality problem of line defect

● Whole inkjet printer structure is fully optimized with environmental protection and advanced HMI evolution

● Ink circulation is closed-loop control fully for flow rate balance which meets for both light or dark colors production needs

● The ink circulation is equipped with water bath heating in order to support high-flow printing per glaze effect inks

● High ink flow circulation in 130ml/per min is more suitable for ceramic ink inkjet printing

Printhead configuration

MAX RC1536 / MAX RC1536L

● Optional 4 types of drive waveforms selectable: fine, standard, high volume, and super high ink volume

● 108mm printing width per each single printhead

● Smallest ink drop is 13pl which can show the delicate inkjet printing resolution

● Maximum big ink drop is 133pl which is a powerful tool for dark design tile production

● MAX RC1356 / RC1536L glaze effect inks / Cover inks higher than 45g/sqm (Density 1300g/cm3 )

LEAPING DEVELOPMENTS OF FUNCTIONS
● Production change within 1 second ● Solve theproblem of color diference and color mark as the compensation can be adjusted freely from -100% to +100%
● 6 times higher than before based on the thousand trillion industrial network system ● Handover position traceless processing function
● Increasing 2G memory to 4G in order to meet the requirements of big slabs

https://www.kingtautech.com/Suitable-for-ceramic-inkjet-printing-tile-printer.html

Posted in Default Category on December 29 at 05:09 AM

Comments (0)