We've been battling floods throughout history. With the development of science and technology, people have produced a series of scientific and technological products to carry out flood control work, and the flood control wall system is one of them. Yongjing will share with you the features and functions of the integrated mobile flood wall system.
Tightness, the first condition for water blocking is tightness. This is something that needs to be considered in product design, but some manufacturers' production equipment sometimes cannot meet this requirement. It is precisely because of its shortcomings in some aspects of production that the product's water blocking effect is not so good. Therefore, the first thing is to make a reasonable design for the combination of products and production. The core of the waterproofing of the flood wall system is to introduce water into the aluminum beams to increase the weight of the flood baffle. Use 15 cm thick aluminum alloy to press and grow a 2-meter mouth-shaped aluminum beam.
When the flood wall system is completed, it will be connected with strong iron nails to become a bracket. The bolts are reinstalled, the walls and steel columns are connected by bolts, and then the brackets are installed, and special washers are installed on the brackets to completely seal with the concrete foundation to form a waterproof seal. In the event of flooding, a crew of three is said to be able to install a 1,200 square foot floodwall in 2 hours. Generally, it can be used for more than 50-100 years. This kind of prefabricated flood wall can be used to build dams or embankments with concrete structure foundations, and it can be installed and disassembled freely.
The flood wall system has the characteristics of light weight, corrosion resistance, recyclability, high residual value of waste, and simple installation. Calculated on the basis of 40 kilograms per meter of aluminum alloy waterproof wall, the aluminum content of a flood wall with a length of 1 km and a height of 2 meters is about 400 tons.
Drainage in many old cities has always been a big problem. Because the drainage design of the old city is too unreasonable. If there is heavy rain in many places, a lot of water will accumulate on the road. The birth of the flood control and flood wall system is a good solution to this problem. Compared with traditional sandbags and other ancient water blocking methods , The waterproof and flood wall system has the following characteristics.
1. Easy to use
The waterproof and flood-proof wall system is made of aluminum alloy and weighs only 15 kilograms. Just open the safety device when using it. Only one person can complete the open movement, which is simple and convenient.
2. Reasonable design
The waterproof and flood wall system is located at the entrance and exit side of the place where it is required. It adopts the slider hydraulic technology and can be folded at ordinary times without hindering the in and out traffic.
3. Safe and durable
The components of the flood wall system are made of stainless steel and aluminum alloy, which are durable and can withstand typhoons of level 12.
4. Good sealing
The bottom of the flood wall system is made of high-quality rubber, which has excellent high elasticity and viscoelasticity, and can well ensure the sealing performance.
5. Beautiful and generous
The flood wall system is more than 2 meters high and 40-50 cm wide, and the flood wall system has a bright fire red color, which is eye-catching.
Mobile Flood Wall Supplier - Yongjing
Jiangsu Yongjing Water Conservancy Technolog is known as Pearl of Taihu lake in Wuxi,Jiangsu. It is a supplier of prefabricated guardrail flood control systems, landscape flood control systems, municipal water conservancy flood systems, and emergency flood control equipment. Welcome to consult us!
https://www.yjslfloodwall.com/Features-and-functions-of-integrated-mobile-flood-wall-system.html
Comments (0)