Do you know the Introduction of billet heating furnace?

Do you know about equipment composition of billet heating furnace? Are you right interested in the introduction of billet heating furnace? There is a lot of knowledge here that needs careful study. Billet heating furnace seller Wuxi Yushun is willing to explain this to you.

Introduction of billet heating furnace

Continuous heating furnace, including push steel heating furnace, stepping furnace, rotary bottom furnace, sub-chamber furnace, and other continuous heating furnace, but used to often refer to push steel furnace.
Continuous heating furnaces are mostly used for heating metal billets before rolling, and a few are used for forging and heat treatment.
The main characteristics are the billet in the furnace in accordance with the rolling rhythm of continuous movement, furnace gas in the furnace also continuous flow; In general, the temperature of each part of the furnace and the temperature of the metal material in the furnace basically do not change with time but only change along the length of the furnace under the condition that the section size, variety, and yield of the furnace charge remain unchanged.

1. Many rolling mills have many cold billets that need to reheat. Some hot billets go out from the casting machine, because of the long rolling table, and the temperature of hot billets falls down to 600C-800, need to reheat the billets to 1250℃ to go to the rolling machine.

2. Induction reheating furnace can specially designed for a rolling mill. Can design furnace type according to customer's roll table direction. An induction reheat furnace can use to reheat billets or heat cold billets to 1250℃.

3. Induction reheating furnace are customized under the customer's workshop size. and customer's special requirements.

4. Furnace can also heat all kinds of iron/steel/aluminum bars, boards, and pipes.etc

5. Heating speed fast, can stop production at any time. This advantage is much better than a gas furnace.

6. Easy operation and maintenance. Environmental protection.

Walking beam billet 250t/H rolling mill continuous heating large-tonnage

Equipment composition of billet heating furnace

Furnace body

1. The induction coil is insulated by two insulation treatments, high-temperature insulating paint, and fiberglass ribbon winding.
2. The top of the furnace body is designed with a sliding cover, which is convenient for maintenance and inspection. 

Feeding system

1. The feeding system adopts pinch roll feeding, which is suitable for a bar diameter range of 40-120mm.
2. The feeding speed is controlled by a variable frequency motor and the feeding speed is adjustable.
3. The pitch roller feeding motor and the reducer all adopt an aluminum shell, which can effectively prevent the heat around the coil. 

Temperature control

1. This system can accurately control the outlet water temperature, the water inlet, and the outlet of the furnace body adopt a water-cooled copper plate.
2.  The cooling water pipe of the furnace body adopts a high-temperature carbon-free hose, and the service life is more than three
years. 

Control cabinet

1. The main control board of the cabinet is microcomputer control, one-key zero pressure start, plug and play.

2. The separate insolation design of the water pressure meter of the furnace body and control cabinet can make the user more convenient and intuitive to monitor the water pressure of the control cabinet and furnace body.

Billet heating furnace seller

The above are some insights of billet heating furnace seller Wuxi Yushun on equipment composition of billet heating furnace and introduction of billet heating furnace, where we produce all kinds of heating furnace, if you need them, you can contact us at any time!

https://www.wxisun.com/Do-you-know-the-Introduction-of-billet-heating-furnace.html

Posted in Default Category on February 23 at 01:11 AM

Comments (0)